TECHNISCHE PARAMETERS

  • Model RJ-3015HT
  • Werkgebied Sheet: 3000*1500mm; Tube:6000xφ220mm
  • Laser Source1000W-6000W
  • Laser Golflengte 1070nm ± 10 nm
  • Toepasselijk Materiaal Metalen plaat, Metalen buis
  • Snijsnelheid 70m/min
  • Maximale versnelling 1.2G
  • Pipe Diameter 15mn - 220mm
  • Vierkante buis Dimension 20X20-110X110mm
  • Positioning Nauwkeurigheid ±0.03mm
  • Herhaalde instelnauwkeurigheid ± 0.03mm
  • Koelmodus Waterkoeling
WZ-XQ-激光头

Auto Focus Laser Head-Without Manual Focusing

The software automatically adjusts the focusing lens to realize automatic perforating and cutting plates of different thickness. The speed of automatically adjusting focus lens is ten times of the manual adjusting.

Bigger adjustment range

Adjustment range -10 mm~ +10mm, precision 0.01mm, suitable for 0 ~ 20mm different types of plates.

Long service life

Collimator lens and focus lens both have water-cooling heat sink which reduces the temperature of the cutting head to improve the life of the cutting head.

 

WZ-XQ-床身 Heavy Duty Welding Lathe Bed

Lathe bed is welding by high-strength carbon structural steel, which can ensure the strength and tensile strength of the bed. It is also very beneficial to the laser cutting machine cutting speed.

 

 

WZ-XQ-横梁 4rd Generation Aviation Aluminum Beam

It is manufactured with aerospace standards and formed by 4300 tons press extrusion molding. After aging treatment, its strength can reach 6061 T6 which is the strongest strength of all gantries.

 

Compared with cast aluminum gantry, aviation aluminum has many advantages, such as good toughness, light weight, corrosion resistance, anti-oxidation, low density, and greatly increase the running speed.

 

Compared with normal aviation aluminum, it adopts a honeycomb structure with 8 holes in the cross section, which greatly enhances the strength of the beam. 

 

 

 

23 Double Roller Claw Easily to cut thin tubes; Larger Cutting Range: 6m length; diameter: 20-220mm, rectangular tube:20*20mm-220*220mm;  

 

 

Double Pneumatic Chuck

It adopts pneumatic clamp design on both sides and it can modulate the center automatically. Compared with electric chuck, clamping force is easier to adjust, and the pipe is not deformed;

WZ-XQ-管卡
   
Fractional Automatic Support Installation It employs intelligent tube support design, which solves the deformation problems in long tube cutting process .  25
   
Transmission and Precision
WZ-XQ-电机  WZ-XQ-齿条
WZ-XQ-滑轨 WZ-XQ-减速机
Ruijie fiber laser cutting machine adopts international famous brands, such as Taiwan HIWIN guide rail & YYC rack, Japanese YASKAWA servo motor motor & SHIMPO reducer, which guarantees high running speed, acceleration, accuracy and stability.
WZ-XQ-激光头

Auto Focus Laser Head-Without Manual Focusing

The software automatically adjusts the focusing lens to realize automatic perforating and cutting plates of different thickness. The speed of automatically adjusting focus lens is ten times of the manual adjusting.

Bigger adjustment range

Adjustment range -10 mm~ +10mm, precision 0.01mm, suitable for 0 ~ 20mm different types of plates.

Long service life

Collimator lens and focus lens both have water-cooling heat sink which reduces the temperature of the cutting head to improve the life of the cutting head.

 

WZ-XQ-床身 Heavy Duty Welding Lathe Bed

Lathe bed is welding by high-strength carbon structural steel, which can ensure the strength and tensile strength of the bed. It is also very beneficial to the laser cutting machine cutting speed.

 

 

WZ-XQ-横梁 4rd Generation Aviation Aluminum Beam

It is manufactured with aerospace standards and formed by 4300 tons press extrusion molding. After aging treatment, its strength can reach 6061 T6 which is the strongest strength of all gantries.

 

Compared with cast aluminum gantry, aviation aluminum has many advantages, such as good toughness, light weight, corrosion resistance, anti-oxidation, low density, and greatly increase the running speed.

 

Compared with normal aviation aluminum, it adopts a honeycomb structure with 8 holes in the cross section, which greatly enhances the strength of the beam. 

 

 

 

23 Double Roller Claw Easily to cut thin tubes; Larger Cutting Range: 6m length; diameter: 20-220mm, rectangular tube:20*20mm-220*220mm;  

 

 

Double Pneumatic Chuck

It adopts pneumatic clamp design on both sides and it can modulate the center automatically. Compared with electric chuck, clamping force is easier to adjust, and the pipe is not deformed;

WZ-XQ-管卡
   
Fractional Automatic Support Installation It employs intelligent tube support design, which solves the deformation problems in long tube cutting process .  25
   
Transmission and Precision
WZ-XQ-电机  WZ-XQ-齿条
WZ-XQ-滑轨 WZ-XQ-减速机
Ruijie fiber laser cutting machine adopts international famous brands, such as Taiwan HIWIN guide rail & YYC rack, Japanese YASKAWA servo motor motor & SHIMPO reducer, which guarantees high running speed, acceleration, accuracy and stability.

TOEPASSING INDUSTRY

Elektrolytische plaat, auto-onderdelen, lift productie, metaal hotel levering, beeldapparatuur, reclameborden, precisie-onderdelen, elektrische, mechanische apparatuur, auto-accessoires, las productie, verlichting hardware en hardware producten.

VAN TOEPASSING MATERIAAL

Roestvrij staal, koolstofstaal, messing plaat, Aluminiumplaat, verzinkt, mangaan staal, elektrolytisch plaat, zeldzame metalen en andere metalen platen

monsters te snijden

zend ons een bericht